[Adrian120698]

Hi, I have a problem with the vector unit, it does not brake the inertia of the shusle in any rpm and consequently it increases the voltage and the alarm is alarmed we unclog the unit and it has the G10N50 in short we have changed it a couple of times and it puts it back in short we do not know the reason if someone could help me with this failure

[cncmakers001]

Hi, I have a problem with the vector unit, it does not brake the inertia of the shusle in any rpm and consequently it increases the voltage and the alarm is alarmed we unclog the unit and it has the G10N50 in short we have changed it a couple of times and it puts it back in short we do not know the reason if someone could help me with this failure

A braking failure that leads to DC bus overvoltage alarms, and repeated failure (shorting) of the G10N50 component
(likely an IGBT or similar high-power transistor) in the braking circuit.