PlasmaCam has released their new GENESIS table. They made many improvements over the older models (DHC, DHC2 and Samson 510)

- They got rid of the rails!

- They got rid of the Parallel Cable!

- They improved the gantry and carriage that now roll on REAL bearings, and NOT on painted surfaces!

- They got rid of the interlocking grate slats!

They are coming out with a 4x8, and 5x10 and 2x2 version of the GENESIS table in the future.

The new GENESIS table is worth a serious look!

Joe

http://www.plasmacam.com/genesis.pdf