Hi,
I have tried numerous times to download user manual and configurator program for a Yaskawa SGDB20AMA. But the transfer always gets broken after about 2Mbyte. My DSL is sick, so that takes about 2 minutes.
If you have a fast (DSL) line please try this to see if the problem is with my end or the other.
Go to: ftp.yaskawa.de/Public/PDF_Technical_Documentation/Motion&Control/SigmaI_Series/SGDB then try to download English_User_Manual_SGDB(TSE-S800-16D).zip
This is an appx. 11Mb file.
If you can get it, I have more problems than just low speed here. If not, I'll try to contact yaskawa.de and ask them for advice.
Thanks
Thread: Do you have a fast DSL? Help!
Results 1 to 12 of 12
-
08-17-2004, 05:13 PM #1
Banned
- Join Date
- Apr 2004
- Posts
- 678
Do you have a fast DSL? Help!
-
08-17-2004, 05:31 PM #2
Registered
- Join Date
- Mar 2004
- Posts
- 37
I was able to download the file but after it completed Winzip said it was not a valid archive. I will try again.
Cheers
Greg
-
08-17-2004, 05:52 PM #3
Registered
- Join Date
- Mar 2004
- Posts
- 37
I tried three times but I have had no luck in downloading a valid file. I tried both English manuals and both are flagged by Winzip as an invalid archive. I opened the zip using Word and I do see a valid PDF header but unfortunately it just seems the ZIP file is broken.
Cheers
Greg
-
08-17-2004, 05:52 PM #4
Registered
- Join Date
- Apr 2003
- Posts
- 1079
i managed to download 6.9Mb before it finnished. The file seems to be corrupt.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-17-2004, 05:57 PM #5
Banned
- Join Date
- Apr 2004
- Posts
- 678
Thanks guys.
I'll try to contact Yaskawa.de and ask them. Since there are 3 different persons at different continents that have problems, I assume the problem is at their site.
-
08-18-2004, 05:14 AM #6WallCrawler Guest
2004-08-18 00:11:43 EST: 8298 / 935
Your download speed : 8497828 bps, or 8298 kbps.
A 1037.3 KB/sec transfer rate.
Your upload speed : 957548 bps, or 935 kbps.
-
08-18-2004, 05:15 AM #7WallCrawler Guest
Go to DSL reports http://nyc.speakeasy.net/ there is great info on how to tweak your system
-
08-18-2004, 05:15 AM #8WallCrawler Guest
-
08-18-2004, 05:16 AM #9WallCrawler Guest
-
08-18-2004, 02:19 PM #10
Registered
- Join Date
- Apr 2003
- Posts
- 1079
Wallcrawler, that's got to be a record number of consecutive posts there!
Sorry for going O/T!(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-18-2004, 02:41 PM #11
Registered
- Join Date
- Apr 2004
- Posts
- 439
they must have fixed the problems as i download
English_User_Manual_SGDB(TSE-S800-16D).zip
and it unzips fine for me. maybe if you're still having a problem i can break the zip into 10 1mb files for you?
-
08-18-2004, 03:25 PM #12
Community Moderator
- Join Date
- Mar 2003
- Posts
- 6855
That's one way of increasing post counts.
Originally Posted by kong
Reply With QuoteSimilar Threads
-
Dancin' as fast as I can boss...
By lsfoils in forum Safety ZoneReplies: 4Last Post: 09-19-2005, 08:31 PM -
Speed how fast an axis can move?
By jlagran he in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 01-05-2005, 05:05 AM -
Rapid Traverse Too Fast
By gopackgo in forum Mach Software (ArtSoft software)Replies: 6Last Post: 11-25-2004, 06:50 AM -
Running with a wave driver , too fast?
By Konstantin in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 03-30-2004, 11:11 PM -
IPT too fast for old equip
By inthedark in forum Uncategorised MetalWorking MachinesReplies: 5Last Post: 01-14-2004, 03:17 PM
Posting Permissions
