I am looking for quote for bending aluminum.
.090 Alum
14.5 W
11 H
Will be machined and bend lines will be drawn. need 4 bends to make a C channel.
Close to the midwest, WI preferably
Bruce
I am looking for quote for bending aluminum.
.090 Alum
14.5 W
11 H
Will be machined and bend lines will be drawn. need 4 bends to make a C channel.
Close to the midwest, WI preferably
Bruce
Bruce
If you only need one of these it would probably be best to get someone local. Check with local welding/fabrication shops there should be one that would do this for very little money.
Jeff T.
http://www.3dcarvestudio.com