Hi folks I have now used so much time struggeling with my old Maho 432 controll but now I have desided to retrofit with a new CNC control. I have a Fagor 8055M CNC controller that I wil fit on the machine. The control have 24 digital outputs and 40 inputs. I plan to use the original servo motors and the 3TRM 2 Servo drive.

But I unfortunally don't have the manual for the 3TRM 2 servo drive. So my question is. Do anyone know the level on the analog signal into the 3TRM 2. Is it +-10V signal?
I don't have this information?

Or maybe someone could measure the signal from the control to the 3TRM 2 drive