[MIKINI MECH]

Mikini Mechatronics would like to announce it's new product line, the 1610L compact CNC machining center. It has been in development since 2005, launched in 2008.

The 1610L's key features are as follows:

Fits in 3' x 5' floor space, fully enclosed. Fits through 36" doors

Cast in G3000 35KSI low silicon grey cast iron, with fully cast stand

16 " x 10 " x 16 " XYZ travel

30 " x 9.5 " table, 5/8" slots

3 Hp Brushless Linear drive spindle with R8 taper

310 - 5400 Spindle RPM with ISO P4 bearings

H class linear guides on all axis

JIS C3 Class ground ball screws

Only requires 220 VAC 1 phase power

Weighs 2000 lbs

Flood cooling system installed and tested

Integrated 4 axis MIKINI V1.2 CNC & Manual control system

Optional industrial PC CNC controller

Pin Hinged doors are easily removable for large stock

Fully cast base facilitates easy movement

Single shot 15 point oiling system

We feel that this product defines a new class of CNC machining centers, in terms of performance, value and scale.

Please find full details, more photos, and specification sheets at www.mikinimech.com

We also welcome dealer inquires worldwide.

We have a limited offer on just a few 2008 machines, and would like to offer a substantial discount to CNC ZONE members on these machines.

We welcome comments and questions. We hope to have videos available soon.

Thank you for your time. We look forward to serving the CNCZONE community.