586,666 active members*
4,362 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Changing Home Position in Parameters on Fanuc Series oi-Model D (SMTCL)

Thread: Changing Home Position in Parameters on Fanuc Series oi-Model D (SMTCL)

Results 1 to 3 of 3
  1. 04-10-2016, 07:00 PM #1
    DBALRAM
    DBALRAM is offline Registered
    Join Date
    Nov 2008
    Posts
    3

    Changing Home Position in Parameters on Fanuc Series oi-Model D (SMTCL)

    Hi All,

    I was wondering if anyone knows the parameter # associated with changing the Machine X,Y home positioning? The machine is a SMTCL 850B, Fanuc Series oi mate -Model D.

    Thank you in advance,
    D
    Reply With Quote Reply With Quote
  2. 04-11-2016, 05:49 AM #2
    zavateandu
    zavateandu is offline Registered
    Send a message via MSN to zavateandu Send a message via Yahoo to zavateandu
    Join Date
    Dec 2009
    Posts
    964

    Re: Changing Home Position in Parameters on Fanuc Series oi-Model D (SMTCL)

    1815.4---APZ
    Reply With Quote Reply With Quote
  3. 04-11-2016, 02:40 PM #3
    drdos
    drdos is offline Member
    Join Date
    Apr 2011
    Posts
    841

    Re: Changing Home Position in Parameters on Fanuc Series oi-Model D (SMTCL)

    Like zavateandu wrote: 1815.4---APZ Move your axis to the location where you want the new home position to be then make it a 0 (You will get an alarm to power off, don't power off yet) then change it back to a 1. Now cycle power. Be careful in doing this as it will change the axis position and you might not be able to change tools any more if you changed that location by doing this process.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Changing the parameters for ballscrew Fanuc 15M
    By kningzer in forum Fanuc
    Replies: 18
    Last Post: 04-11-2019, 06:09 PM
  2. changing gantry home position in Muratec MW120 lathe
    By kalsiar in forum Fanuc
    Replies: 2
    Last Post: 04-20-2015, 04:47 PM
  3. Changing or disabling home position for tool change.
    By MikieD in forum Hyundai Kia
    Replies: 24
    Last Post: 08-21-2012, 02:08 AM
  4. home position for fanuc 0i mate model C
    By beth_piyik in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 03-23-2011, 10:03 AM
  5. Changing home position
    By positiverake in forum Fanuc
    Replies: 7
    Last Post: 12-29-2009, 09:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules