[winds1sj]

I have two KM3Ps one is a KDB900 the other is a KDB800. I just got the card cage and all the PCBs cleaned and repaired. However, I do not recall where the connectors on the bottom of the card cage go. P1 is a 6 pin connector so there is only one place for that. But P2,P3,P4, and P5 do not tell me where they go. I can identify which connector is which but not where it goes on the card cage. The wiring schematics say connect p4 to card rack J13 and P5 to card rack J14, but where are those and it does not tell me where to put P2 and P3. Also are the card cages different?

Please help!

winds1sj

[kc8jyr]

Has someone answered this question? If so, I can not find the answer.
Thank you for your help

I have two KM3Ps one is a KDB900 the other is a KDB800. I just got the card cage and all the PCBs cleaned and repaired. However, I do not recall where the connectors on the bottom of the card cage go. P1 is a 6 pin connector so there is only one place for that. But P2,P3,P4, and P5 do not tell me where they go. I can identify which connector is which but not where it goes on the card cage. The wiring schematics say connect p4 to card rack J13 and P5 to card rack J14, but where are those and it does not tell me where to put P2 and P3. Also are the card cages different?

Please help!

winds1sj