Could somone conected to DESKCNC please advise on support status. Is there a more sutable place to direct questions to? Having paid for the componenets it would be nice to know i'm not left to fend for myself. Please reply.
Thread: support
Results 1 to 2 of 2
-
12-17-2009, 07:27 AM #1
Registered
- Join Date
- Dec 2008
- Posts
- 8
support
-
12-17-2009, 01:54 PM #2
Gold Member
- Join Date
- Dec 2004
- Posts
- 1865
Hi Rooboy,
I am not connected to Deskcnc in any way other than I use it to run my router and I use the cam portion for all my machines.
I will try to hep if I can. I have only had to contact them once and I just sent an email through the Deskcnc web site. Karl was very responsive and was open to the suggestion that I made.
One thing I did find out is that the cam portion is windows shortcut compliant in that the ctr/x/c/v work for cu,t copy, and paste when working with G-code. These shortcuts don't appear when you right click.
Let me know if I can help out in any other way.
MikeWarning: DIY CNC may cause extreme hair loss due to you pulling your hair out.
Reply With QuoteSimilar Threads
-
Support.
By Jens H in forum Automation Technology ProductsReplies: 21Last Post: 09-30-2009, 02:51 PM -
no support
By ljd10 in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 09-30-2009, 08:27 AM -
Support
By Brendan in forum MilltronicsReplies: 1Last Post: 03-17-2008, 03:31 PM -
PC CAM support
By tengo8 in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 03-04-2008, 01:25 AM -
APT Support
By cimlinc in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 10-24-2006, 06:01 PM
Posting Permissions
