527,821 active members*
2,502 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Spindle orientation failure
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Feb 2016
    Posts
    9

    Spindle orientation failure

    Cincinnati Milacron Arrow 750, A spindle motor went out. I pulled one from another machine but I cannot figure out how to get the alignment right after several attempts.
    Right now on M19S0 it just sits there and chirps about 4 times per second and then displays the following alarm:
    Spindle Orientation Failure
    The control has not seen the spindle orientation feedback signal. (CR_OR_COMP) or NCEE signal N1SPDL_CHG.

    Please help.

  2. #2

    Re: Spindle orientation failure

    Quote Originally Posted by NationalAutomat View Post
    Cincinnati Milacron Arrow 750, A spindle motor went out. I pulled one from another machine but I cannot figure out how to get the alignment right after several attempts.
    Right now on M19S0 it just sits there and chirps about 4 times per second and then displays the following alarm:
    Spindle Orientation Failure
    The control has not seen the spindle orientation feedback signal. (CR_OR_COMP) or NCEE signal N1SPDL_CHG.

    Please help.
    The spindle encoder may need to be reset to zero.
    http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html

  3. #3
    Junior Member
    Join Date
    Mar 2008
    Posts
    70

    Re: Spindle orientation failure

    Have you matched the Motor Part Number;
    MEG-OHMed the motor and checked the ohms;
    verified that the M11 Contactor is picking up and that the Contacts are not burned up?
    What was bad on the old motor?
    Are you getting Alarm LED on the spindle drive, or any blinking LEDs?

    Fives-MSI offers Tech-Support, Parts and Service on this machine.
    1-800-934-0735 Tech-Support-Cincinnati

Similar Threads

  1. Spindle Orientation
    By Will_0000 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 07-01-2013, 03:29 PM
  2. VMC40 Orientation Failure
    By rdoty in forum Fadal
    Replies: 4
    Last Post: 02-11-2011, 04:49 PM
  3. Fadal Orientation failure
    By Paul Petersen in forum Fadal
    Replies: 5
    Last Post: 11-15-2007, 04:29 PM
  4. Spindle orientation
    By StampCraft in forum Haas Mills
    Replies: 5
    Last Post: 11-11-2007, 12:31 AM
  5. Spindle orientation
    By jimecv in forum Daewoo/Doosan
    Replies: 4
    Last Post: 11-09-2007, 06:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •