548,478 active members*
2,406 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Oct 2009
    Posts
    19

    Smile SST Knurled Shaft Collar - 500pcs

    Please quote 500pcs - reorders likely.

    303 or 304 - whichever is cheaper / easier to machine.

    1/2" bore can probably be drilled, but it needs an easy slide fit on an on-size 1/2" shaft.

    Looks like a Fine Knurl - will confirm and/or can provide a sample.
    It also looks like the diamonds are not sharp/complete is ok...

    Length tolerance -0.0 +.005

    OD knurl swell is no problem.

    Include ETA -

    Shipping to 37374 would be helpful

    Thanks for your interest,

    please contact:
    wrathmachine7@yahoo.com
    Attached Thumbnails Attached Thumbnails IMG_3933.jpg   IMG_3932.jpg  
    Attached Files Attached Files

  2. #2
    Registered
    Join Date
    Oct 2009
    Posts
    19

    Re: SST Knurled Shaft Collar - 500pcs

    QUOTE IS CLOSED - THANKS TO ALL WHO RESPONDED

Similar Threads

  1. Replies: 1
    Last Post: 09-14-2014, 07:20 PM
  2. Short run (500pcs) poss. laser or waterjet job
    By jrh_engineer in forum USA RFQ's
    Replies: 1
    Last Post: 08-25-2014, 03:16 AM
  3. Shaft collar backlash
    By saintpaul in forum Benchtop Machines
    Replies: 0
    Last Post: 08-07-2012, 11:27 PM
  4. knurled surface
    By larry53 in forum Autodesk
    Replies: 2
    Last Post: 12-28-2010, 03:25 PM
  5. RFQ - small knurled 'caps' for M2 SHCS
    By sierra4sport in forum Employment Opportunity
    Replies: 2
    Last Post: 04-14-2008, 04:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •