[smorris]

I just got this SuperMax ycm-40 serial number 906257. I'm looking for a manual and a parts list. If any one has one please let me know, if I can have a copy. The servos have been removed and I'm not sure what size were in it.
Also if anyone has a controler or any other servo parts please let me know.This machine has had all CNC removed.
Thank You!
Steve

[Michael Turner]

Contact cwaugs here, Wayne was of great help to me he has scanned manual that he emailed to me sure he would do the same for you.

cwaugs

[mrogowski]

I too am looking for a copy. Tried contacting him with no luck.

If anyone has one either in electronic or printed form, I am more than willing to compensate you for your time to send me a copy. Heck, I'll even make it available through my website for others to acquire.

Thanks,
Mark

[mrogowski]

Micheal is the man! He shot me over his copy which I have converted to pdf. Here is the link to download it if folks need one:

http://www.mach5audio.com/download/s...max-ycm-40.pdf

[MrWild]

Thanks! When i replaced the pulley bearings and belt I went in blind as i couldn't find a manual. It was simple enough to do, but this manual will come in handy next time.

[mrogowski]

Yes, I had to replace the limit switch that sits behind the Y axis servo, and while a fairly lengthy process, I was pleased at how well thought out the design of this mill is. They even made provisions for removing the drive pulley from the motor using the mounting screws. Nice stuff.

Mark

[RMT41]

I know this is a old post but I'm in need of a manual for a supermax YCM 40 also and can't find it on this link www_mach5audio.com/download/supermax/supermax-ycm-40.pdf
can any one send it to me in a pdf would be very helpful
Thanks David

[mrogowski]

here you go:

www.istonline.ca/download/supermax-ycm-40.pdf

[RMT41]

mrogowski thanks for the fast response this will be very helpful.

[CNC-Joe]

mrogowski - your link to the manual.pdf - is not working

[mrogowski]

mrogowski - your link to the manual.pdf - is not working

Use the link in Post #8 - new location.

[CNC-Joe]

Thank You Mr O. !