i have major problems, my heian has been down for 3 weeks now. i was told that it was the amp, we have changed it twice and still doing the same thing. the error is SV013 Y and U IMPROPER V_READY OFF. ANYONE HAVE SUGGESTIONS ON WHAT I SHOULD DO NOW!!!!!!!
Results 1 to 11 of 11
-
11-06-2006, 11:16 PM #1
Registered
- Join Date
- Jul 2006
- Posts
- 19
svo13 y and u improper v_ready off
-
11-06-2006, 11:25 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Sounds like a Fanuc? what make & model?
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
11-06-2006, 11:29 PM #3
Registered
- Join Date
- Jul 2006
- Posts
- 19
Fanuc Series 15-m
-
11-06-2006, 11:32 PM #4
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
What axis do you actually have?
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
11-06-2006, 11:47 PM #5
Registered
- Join Date
- Jul 2006
- Posts
- 19
x and z is not off but my ready light is also off.
-
11-07-2006, 12:49 AM #6
Registered
- Join Date
- Nov 2006
- Posts
- 17
check input voltages to drive on all 3 phases should be between 200-220.(BE CAREFULL )
Not sure but drive may be detecting fault on a phase U ,may be on output, you could swap x and y drives if drive and motor the same to see if fault transfers .I will check with Fanuc uk in morning for you but cant reply til pm. Good Luck
-
11-07-2006, 07:31 PM #7
Registered
- Join Date
- Nov 2006
- Posts
- 17
Not much more info from Fanuc i'm afraid. They reckon could be main system,wiring or amp (pretty vague eh!) sorry!
-
11-08-2006, 03:50 PM #8
Registered
- Join Date
- Jul 2006
- Posts
- 19
we are checking wiring today and more fuses. thank you
-
11-08-2006, 11:10 PM #9
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Do you have the maintenance procedure for checking SV013?
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
11-09-2006, 01:42 PM #10
Registered
- Join Date
- Jul 2006
- Posts
- 19
no maintenance procedure just standard checking.
-
11-15-2006, 03:11 PM #11
Registered
- Join Date
- Jul 2006
- Posts
- 19
on the problem that i had, i was sending my amp off to be rebuilt which did not work so i ordered a new one which cost about $5000 but now i am up and running. thanks to everyone.
Reply With Quote
Posting Permissions
