thinking of finally selling my nm-200 and stepping into a production machine. this machine is about 4 years old and has the 4k rpm AC motor/VFD(very reliable and powerful). just installed brand new ball screws and ball nuts on x and y axis as well as new y axis bellow covers. spindle was upgraded to fafnir abec 7 super high precision bearings and was recently repacked with fresh grease. coolant system was upgraded with much larger (10gal+) tank and larger return drain with mesh chip catcher. powerful coolant pump and true locline with 2 lines floods very nicely. the sale of the mill would include the control computer, coolant splash guards, my custom coolant containment/surround, 10x15" tilt table, 1 parlec 6x9" vise (very nice vise) and 10-12 tool holders(more upon request). this machine is tuned very well and runs strong. mach3 software included and possibly bobcad/cam V23. looking to get $9500 for complete ready to run package. located in Portland Oregon. [email protected] for more details.