[Doubleddaved]

When running my vf8/50 in memory I have no control of aux. tsc (Thru Spindle Coolant). In memory it starts on a m88 and only shuts off when it reads a m89.So when I want to take a measurement while in memory the tsc is still blasting out at 1000psi.The aux coolant button only works when not in memory.
Does anyone know if there is a setting for this?How does everyone else deal with this?
Thanks
Dave

[WOLOG]

Check the door switches behind the door in the enclosure. If they moved, you can not use the AUX coolant button.

[Matt@RFR]

For this I go:

.....program.....
/M89
/M0 (VERIFY x DIMENSION)
M88
M3 Sxxxx
.....rest of program......

The control software forces the spindle to be stopped when the TSC is either turned on or off and that's why you can't shut it off with the button when running a program.

[Moparmatty]

Put the machine into jog away mode and the AUX Coolant button will work and stop the spindle and coolant flow.

Matt