I just saw this article tonight while researching another issue and thought that the author presented quite a few solid nuggets of information. I only wish that I would have been a more observant MMS reader 7 years ago when I fried a lot of tooling learning how to machine this material effectively. At any rate, I see people asking questions about machining various grades of Ti and I thought that I would share this for their benefit. As most know there is more to being successful in this game than just spending gobs of money on tooling, equipment and calculating appropriate speeds and feeds :-). May your tooling live long and prosper.....Doug P.
10 Tips for Titanium : Modern Machine Shop
Results 1 to 3 of 3
-
08-28-2016, 02:57 AM #1
Registered
- Join Date
- Aug 2009
- Posts
- 610
Titanium Machining Tips- A Good MMS article on the topic
-
08-28-2016, 04:51 AM #2
Member
- Join Date
- Nov 2013
- Posts
- 402
Re: Titanium Machining Tips- A Good MMS article on the topic
Nice link. Thank you.
-
08-28-2016, 02:51 PM #3
Registered
- Join Date
- Nov 2007
- Posts
- 2151
Re: Titanium Machining Tips- A Good MMS article on the topic
+1 Nice link!
copied the info to my extensive one note notebook
Reply With QuoteSimilar Threads
-
Good CNC DIY article from IEEE
By blue_steel in forum DIY CNC Router Table MachinesReplies: 0Last Post: 06-27-2009, 04:03 PM -
Way Off Topic: My first magazine article published this AM
By Rekd in forum Community Club HouseReplies: 1Last Post: 04-13-2007, 03:27 PM -
Tips for turning Titanium?
By warpedmephisto in forum MetalWork DiscussionReplies: 3Last Post: 05-08-2006, 06:13 PM
Tags for this Thread
Posting Permissions
