Hello Friends,
I am having difficultly making this cut. It is close but comparing the render to the solid it doesn't match. The cutter is a 3.00 45° face mill. The major diameter is 3.50. I made a form tool and tried a really large countersink to simulate the face mill.
***CHANGE THE EXTENSION FROM .TXT TO .VNC TO OPEN IN GIBBS***
Any help would be great!
Thread: toolpath help
Results 1 to 2 of 2
Threaded View
-
11-10-2009, 04:15 AM #1
Registered
- Join Date
- Jan 2007
- Posts
- 161
toolpath help
_____________
teamjnz
Reply With QuoteSimilar Threads
-
Help with toolpath.
By MagooT in forum MastercamReplies: 4Last Post: 02-20-2010, 02:04 AM -
Toolpath
By mopar499 in forum BobCad-CamReplies: 15Last Post: 05-26-2009, 02:34 PM -
What toolpath to use?
By dpark1 in forum MastercamReplies: 2Last Post: 01-09-2009, 03:53 AM -
Toolpath set up?
By Jessica in forum ArtCam ProReplies: 5Last Post: 03-13-2007, 05:13 PM -
3D toolpath help
By Dfennell in forum BobCad-CamReplies: 2Last Post: 02-03-2007, 08:13 AM
Posting Permissions
