[jake76]

I'm building just a simple (or I thought simple) jig table. All it is, is a x=31.75" and Y= 48.375" piece of mdf with 3/8" diameter holes at 4x4 spacing, its just so we can use dowels and clamps to fix our workpiece to. The problem I'm having, is that BC gives a "value overflow Y" when simulating? I went down to just trying two rows (Y-axis) and the overflow error goes away, at three it comes back. Anyone know why this would happen?

For anyone else who has this happen. Goto Cam tree--->Cam defaults --->Current settings--->Machine defintion----> Adjust the value min/max of the axis causing the problem.