535,183 active members*
3,777 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Milltronics > VK3 centurion 6 start up procedure
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Sep 2011
    Posts
    27

    VK3 centurion 6 start up procedure

    I have a new to me VK3 with centurion 6 control.

    When we start up the machine from power down state.
    We have to press F1 then F2 then some "y" and it begins a setup of the scram drive.

    Machine powers up ok and functions all seem to work. But we lose G54 coordinates and tool length offsets
    and have to reset them each time.

    Is this normal?
    Or do we have something wrong?

    Thanks in advance

    Mike

  2. #2
    Registered
    Join Date
    Jul 2010
    Posts
    531

    Re: VK3 centurion 6 start up procedure

    Hi, You are reformatting the SRAM every time you do that. your simdisk battery is most likely bad.

    Give me a call 952-288-6340

    Sportybob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •