554,323 active members*
3,315 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Autodesk CAM > Autodesk Post Processors > Wanted postprocessor for tria 4000/morbidelli u13
Results 1 to 14 of 14
  1. #1
    Registered
    Join Date
    Jan 2015
    Posts
    11

    Wanted postprocessor for tria 4000/morbidelli u13

    Hello, i have two problems with the cnc
    1. i don't have the backup disk for the cnc
    and currently the cnc isn't working because i doesn't calibrate. It moves slowly on the x axys and then it freeze when i press calibrate function.
    i was advised to get a copy of the backup disk and try to reinstal the main program.
    2.
    i want the post processor that will convert the files from xilog 3 to the correct .pgm file for the tria 4000/morbidelli u13
    I believe that this is what i need in order to convert the files: cnv75new.exe.
    thank you very much

  2. #2

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    I think for the Tria 4000 you might need cnvrt.exe I might be wrong? but I have both files (also cnv75.exe) for you, can you PM me your email address?

  3. #3
    Registered
    Join Date
    Jan 2015
    Posts
    11

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    My email is 4ridersro at Gmail. Com

  4. #4

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    Ok Ive emailed them to you

  5. #5
    Registered
    Join Date
    Jan 2015
    Posts
    11

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    Maybe some of you have any manuals for this morbidellii will be very grateful

  6. #6

    Re: Wanted postprocessor for tria 4000/morbidelli u13


  7. #7
    Registered
    Join Date
    Jan 2015
    Posts
    11

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    o now basically the cnc is broken. It has problems with the x,y origin. it doesn't position itself. error 605 error x axys drive. After that a fuse is activated. The cnc doesn,t calibrate

  8. #8
    Registered
    Join Date
    Jan 2015
    Posts
    11

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    i found the 605 error: x axis fault drive
    cause: no drive power. For other causes consult the DRIVE techincal documentation.
    Reset the overload switch. Consult the after-sales service.
    My problem: Where is the overload switch ?

  9. #9

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    In the large panel at the back, it's one of the white circuit breakers... Do you have the wiring diagram? once the program runs the axis faults will go away. my machine brings up the same errors but if i run the program they errors disapear

  10. #10
    Registered
    Join Date
    Jan 2015
    Posts
    11

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    I need the plc disk for morbidelli u13 and tria 4000 type al750

  11. #11
    Registered
    Join Date
    Jan 2015
    Posts
    11

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    Update : i have managed to make it work by copying the files from al385 to my al750. Now i have other problem with tool data: the error is invalid fixturing.
    Fix. i did manage to resolve this problem to.
    Now its up and running. I need to learn the manual now for g code.
    i still need the post processor. and a way to convert the dwg files to pgm. thank you
    !

  12. #12
    Registered
    Join Date
    Dec 2017
    Posts
    1

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    Old thread but I'm searching for a copy of cnvrt.exe and cnv75new.exe. If anyone can help me out it would be much appreciated!

  13. #13
    Member
    Join Date
    Aug 2022
    Posts
    1

    Re: Wanted postprocessor for tria 4000/morbidelli u13

    hi i am looking for the cnv75new.exe file for my morbidelli u13 tria4000
    my email is yvon1964@otmail.com

Similar Threads

  1. tria 4000
    By JLcnc in forum Controller & Computer Solutions
    Replies: 26
    Last Post: 07-05-2021, 03:10 PM
  2. Morbidelli 502 Tria 6000 PLC
    By matt_sheehy in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 11-29-2020, 11:37 PM
  3. morbidelli 504 tria 7500
    By rprman1 in forum Commercial CNC Wood Routers
    Replies: 24
    Last Post: 09-14-2019, 06:04 PM
  4. Morbidelli U26 Tria 6000
    By jon0605 in forum CNC Machining Centers
    Replies: 7
    Last Post: 02-09-2016, 08:56 PM
  5. Aspan 6.2 and Tria 4000
    By datacon1 in forum Commercial CNC Wood Routers
    Replies: 1
    Last Post: 05-26-2013, 06:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •