I'm passionate about learning anything that would require 4-5 axis machining..or learning to apply Powermill,Mastercam,UG software to do this. Nothing inpaticular..Just wanting to learn something that interests me. I'm a decent person with a high motivation level. The generous sharing of this knowledge would be greatly appreciated.
Thread: Wanting to learn in Novi, MI
Results 1 to 5 of 5
-
03-18-2006, 05:45 PM #1
Banned
- Join Date
- Mar 2006
- Posts
- 4
Wanting to learn in Novi, MI
-
03-19-2006, 03:28 PM #2
Registered
- Join Date
- Mar 2004
- Posts
- 761
Italianm28,
I live in Jackson and have 4th and 5th axis programming and operating experence using EdgeCAM and other software. There are others on this board in your local area as well. I once taught CNC programming at a local college (JCC) for a couple of semesters. Welcome to the group.
WayneWayne Hill
-
03-19-2006, 04:04 PM #3
Banned
- Join Date
- Mar 2006
- Posts
- 4
Wayne..thanks for the nicw welcome. I appreciate your reply. If it's not to much of an inconvience for you. Is there a way for me to come and pick your brain on a few things or come down your way and take a look at some of the things your doing.
Or...Any interest in maybe teaching for some $
-
03-19-2006, 04:44 PM #4
Registered
- Join Date
- Mar 2004
- Posts
- 761
italianm28,
You have email
Wayne Hill
-
03-20-2006, 01:17 PM #5
Banned
- Join Date
- Mar 2006
- Posts
- 4
Reply With Quote
Posting Permissions
