532,236 active members*
3,658 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > wasino profile grinder fanuc om won't home
Results 1 to 3 of 3
  1. #1

    Join Date
    Nov 2020
    Posts
    16

    wasino profile grinder fanuc om won't home

    I'm working on a wasino 135as profile grinder with fanuc om controller. I believe that the backup batteries were changed and lost homing program/parameters. When I try to home the machine , it tries to home the z-axis which the machine doesn't have. And it won't allow me to input any parameters until it homes?

  2. #2

    Join Date
    Nov 2020
    Posts
    16

    Re: wasino profile grinder fanuc om won't home

    Today it won't home in x-axis. Error 90 and then 511 overtravel. I tried the fanuc memory restore procedure and can only get to step 6 where it says to select EDIT mode. It won't allow me to select edit, it kicks it back to the home button??

  3. #3

    Join Date
    Nov 2020
    Posts
    16

    Re: wasino profile grinder fanuc om won't home

    bump

Similar Threads

  1. Sheffield Profile Grinder
    By toolmaker4u in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 11-27-2011, 07:44 PM
  2. WTB Wasino Profile Grinder
    By ecast2001 in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 10-27-2011, 08:10 PM
  3. CNC profile knife grinder?
    By Zumba in forum DIY CNC Router Table Machines
    Replies: 5
    Last Post: 02-11-2006, 04:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •