[maw2307]

I have bought a weeke bp30 cnc router that had been without power for some time and has lost its reference points,or so i am told that is what the German writing says on the screen. can anybody help
Mark

[Somerset CNC]

Got the same problem with a BP10, will let you know if anything crops up

[mar404]

I have same problem with weeke BP 10

[mar404]

I have bought a weeke bp30 cnc router that had been without power for some time and has lost its reference points,or so i am told that is what the German writing says on the screen. can anybody help
Mark

I have had same problem with weeke bp10 num750
I ordered original weeke bp10 files and when uploaded it to machine. Now reference starting perfectly.
Now im trying to learn programming.

[aslotto]

Stiles Machinery in Grand Rapids, Michigan used to have some support people who had secreted away information on the BP10, their website is
Total Production Solutions | Stiles Machinery I do not know how much they charge for their services however. The BP10 that I used to run was disconnected and left for a long time, then sold to another shop. When it was hooked up it seemed to be missing 1 operating file, despite my efforts to copy them all when I ran it years before, I must have missed one file, it's not on the floppy disk that I still have. I hope this might help some.
Allen

I have bought a weeke bp30 cnc router that had been without power for some time and has lost its reference points,or so i am told that is what the German writing says on the screen. can anybody help
Mark