548,590 active members*
2,862 visitors online*
Register for free
IndustryArena Forum > CAM Software > Uncategorised CAM Discussion > Which CAM softwares should I consider?
Results 1 to 2 of 2
  1. #1

    Join Date
    Nov 2021

    Which CAM softwares should I consider?

    I am a one man shop with Mazak machines. I only use CAM for 3D surfacing. Mazatrol covers 90%+ of programming needs. Been using Mcam 9.1 but would like to be legit. Mcam is out of my price range. Any information/suggestions/experiences would be appreciated

  2. #2
    Join Date
    Nov 2013

    Re: Which CAM softwares should I consider?

    Fusion 360 is pretty fair, and about $600 per year, and so represents fair value.

    I used MasterCAM also, but not a legit copy either. I still prefer MasterCAM but cant afford it, so I ditched it and bought Fusion 360.

    Fusion has different modules, including an electronics/PCB module and an FEA module both of which I use extensively and so the breath of coverage of Fusion is
    appreciated and even better than MasterCAM.


Similar Threads

  1. cam softwares
    By free_matrex2010 in forum Uncategorised CAM Discussion
    Replies: 2
    Last Post: 09-27-2012, 10:24 PM
  2. mach3 driver controller could work with other cad/cam softwares
    By cncboricua in forum Uncategorised CAD Discussion
    Replies: 1
    Last Post: 12-09-2010, 05:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts