[sgtdavis]

Hello,

I am another newbie who just bought a router mill table 2ft x 3ft and I am looking for a kit similar to the one in the link. http://www.kelinginc.net/CNCNEMA23Package3x.html

•CNC 3 Axis Stepper Motor Kit with 425 oz-in motor and KL-4030
Bipolar Driver with 36V /9.7A Power Supply (110V/220VAC): $389
•(3) 425 oz-in stepping motors, NEMA 23
•(3) KL-4030 Drivers (3.0Amp 24-40 Volts, 1-1/64 micro stepping)
•36VDC/ 9.7A Power Supply 110VAC/220VAC
•(1)C10 Breakout board
•5V power supply

This mill is just for a hobby that will not see a lot work or at least that is what I think now. I was hoping maybe another member might have a decent kit sitting on their shelf since upgrading. If you don’t have anything but have some good advice on new kits please feel free to share.

Thanks
Bill

[felicia]

http://www.cnczone.com/forums/produc...g_cutting.html

Hi, please read this post to find if you need this kits.

Best regards

TOPCNC Automation Technology co., Ltd.

[email protected]