504,064 active members
5,691 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1

    Join Date
    Jun 2019
    Posts
    1

    YASKAWA SGDM-15DN pc connection issues

    Hi Guys

    I am having major issues trying to connect this drive to a PC, newest software, correct cable config and it wont connect using 2 seperate pc's, 3 seperate usb to rs232 serial adapters, 2 of the same drive, is there something i am missing?

    what should be a simple transfer parameter exercise is extremely frustrating.. anyone with experience with this drive?

    pc Lenevo T430s running win 7 64 bit

    comms speed 9600
    7 bit
    parity even
    stop bit 1

    software sigmawin+ 5.75

    any help would be appreciated

  2. #2
    Registered
    Join Date
    Nov 2017
    Posts
    4

    Re: YASKAWA SGDM-15DN pc connection issues

    No experience with this drive , but had plenty of issues with different USB to serial converters. The best solution I found was to just get an old PC with RS232 and transfer files to it from a modern PC and the to the device. Hope this helps.

  3. #3
    Member
    Join Date
    Sep 2018
    Posts
    35

    Re: YASKAWA SGDM-15DN pc connection issues

    Im not familiar with this unit either, but I do know that usb to serial on win7 is a pain in the ass, if you can get it working at all, just having a quick squiz thru your manual states you should connect it with this cable, JZSP-CMS01 , https://www.ebay.com/itm/NEW-Yaskawa...-/173579784109.
    Hope this is helpful

Similar Threads

  1. 610 plus connection issues
    By IdeaFactory in forum Multicam Machines
    Replies: 4
    Last Post: 09-27-2012, 05:01 PM
  2. CONNECTION ISSUES TNC355 to PC
    By pafi in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 0
    Last Post: 06-26-2012, 06:17 PM
  3. Connection to Drive [tuning] issues
    By JerryFlyGuy in forum Granite Devices
    Replies: 0
    Last Post: 11-07-2011, 10:28 PM
  4. Yaksawa SGDH Drive and motor BRAKE ???
    By kben77 in forum Servo Motors / Drives
    Replies: 0
    Last Post: 11-15-2010, 09:30 PM
  5. RS232 connection issues to Milltronics Partner V
    By Jeff S in forum Milltronics
    Replies: 3
    Last Post: 03-16-2007, 12:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •