Hey guys,
Running my VMC15xt mostly thanks to the advises from you guys. It runs ok, finished few jobs and things seem ok.
Got a question - after the tool change, the tool goes to z=0, and later it goes to xyz that I programmed. If the tool change occures, for example, above the fixture setup, it might crash my cutter or worse. Something like that happens when I execute the program via DNC - only, if the tool number in g code is the same as the tool no. in the spindle - then the tool goes to tool exchange height, does nothing (because it's the same tool no.), then goes to z0, and then to programmed z coordinate.
What am I missing? Some first lines or some commands after the tool change in my g code, some parameter setup?
Thanks a lot!!!