603,794 active members*
6,000 visitors online*
Register for free
Login

Thread: 7075 bar stock turned and center drilled

Results 1 to 4 of 4
  1. 10-27-2016, 07:40 PM #1
    advert
    advert is offline Registered
    Join Date
    Jun 2009
    Posts
    17

    7075 bar stock turned and center drilled

    I need a pretty simple part made. as follows

    I need 7075 turned down to 1.144
    I need it to be 6.9 long
    I need it to be center drilled 27/64

    thats it.

    shipped to surprise az 85374


    Thanks
  2. 10-27-2016, 08:24 PM #2
    advert
    advert is offline Registered
    Join Date
    Jun 2009
    Posts
    17

    Re: 7075 bar stock turned and center drilled

    to clarify, I need the hole drilled in the center the entire length. I pretty much need a tube made out of round bar.
  3. 10-28-2016, 03:32 PM #3
    npolanosky
    npolanosky is offline Member
    Join Date
    Apr 2016
    Posts
    39

    Re: 7075 bar stock turned and center drilled

    Quote sent.
    Thanks!
  4. 11-04-2016, 04:41 AM #4
    advert
    advert is offline Registered
    Join Date
    Jun 2009
    Posts
    17

    Re: 7075 bar stock turned and center drilled

    Got it, thanks to all the sent me a msg.

    will need something very similar again soon.
« Previous Thread | Next Thread »

Similar Threads

  1. RFQ - ti and 7075 alum cnc turned parts w/2nd mill/drill ops
    By billet works in forum RFQ (Request for Quote)
    Replies: 4
    Last Post: 08-30-2013, 02:47 PM
  2. Hex Bar Stock turned and drilled/tapped
    By ez3022 in forum Employment Opportunity
    Replies: 4
    Last Post: 10-01-2010, 12:04 AM
  3. RFQ - Turned Steel w/ Drilled & Tapped Set Screws (Cancelled)
    By AuroraDrvr in forum Employment Opportunity
    Replies: 5
    Last Post: 04-14-2009, 07:12 AM
  4. RFQ 34 - Small manual job - Offset turned and cross drilled hardened locking pin
    By InspirationTool in forum Employment Opportunity
    Replies: 9
    Last Post: 09-12-2006, 01:26 PM
  5. RFQ - small mild steel turned and drilled parts
    By mcmmach in forum Employment Opportunity
    Replies: 8
    Last Post: 07-29-2005, 03:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules