[Hythos]

SO, I've tested all the Bobcad v23 non-metric post-procs' that I can find, and none have worked 100%.

Ex., Bobcad Posts F128456 for Feed20;

I've had to manually edit the code in a few ways, but I'd like to know if anyone has a clean Post for the Anilam Crusader M from v23.
Thanks!

[BurrMan]

Hythos,
Another way this can be done is to make a simple program and post some code, then post it here and talk about what you would like to see different and people can help to massage a post that works for your machine.

[Hythos]

Drill Cycle:

ANILAM ELECTRONICS CRUSADER RS-232-C 880915-777
%
N0G0G70G90
N10G29T1001X0Z1
N20G29T1002X.25
N30T0
N40Z0
N50X-.3Y1
N60T1
N70G29LV20 10
N80G29LV21 .1
N90G29LV24 .1
N100G81
N110Z-.13
N120X.5Y-.5
N130G91Y-3
N140G90X4.5
N150G91Y3
N160G80
N170T0
N180G90Z0
N190X-3
N200T2
N210G29LV20 8
N220G29LV21 .1
N230G29LV24 .5
N240G81
N250Z-.35
N260X.5Y-.5
N270G91Y-3
N280G90X4.5
N290G91Y3
N300G80
N310T0
N320G90Z0
N330X-3Y1
N340G29E
%


[Hythos]

Polar Rotation1

ANILAM ELECTRONICS CRUSADER RS-232-C 880915-777
%
N0G0G70G90
N10G52
N20G29T1001X.25Z1
N30T0
N40Z0
N50X0
N60T1
N70G29LV11 2.25
N80G29LV12 1
N90G29LV13 0
N100G29LV15 0
N110G29D7
N120G51
N130X3.3125Y1
N140Z.1
N150F1
N160G1Z-.05
N170G2G91X.875Y0I.4375J0
N180G1Z.1
N190G29LV13 30
N200G29E
N210G52
N220T0
N230Z0
N240G0G90X0Y-3
N250G29E
%


[Hythos]


ANILAM ELECTRONICS CRUSADER RS-232-C 880915-777
1 X 0.0000 IN RAPID ABS
Y 0.0000 IN RAPID ABS
2 FEED 20.0 IN
3 TOOL 1001
4 X 0.0000 IN RAPID ABS
5 TOOL 1002
6 X 0.1875 IN RAPID ABS
7 TOOL 0
8 G81
9 V11 0.0000 IN
10 V12 -1.5775 IN
11 V13 0.0000 IN
12 V15 0.0000 IN
13 V16 180.0000 IN
14 V17 2.0000 IN
15 V18 2.3600 IN
16 G79
17 X 0.0000 IN RAPID ABS
Y 0.0000 IN RAPID ABS
18 ARC CW
19 X 0.0000 IN FEED ABS
Y -1.5775 IN FEED ABS
20 X 0.0000 IN FEED ABS
Y 0.0000 IN FEED ABS
21 ARC
29 X 0.0000 IN RAPID ABS
Y 0.0000 IN RAPID ABS
Z 0.0000 IN RAPID ABS
30 X -1.1000 IN RAPID ABS
Y -.1000 IN RAPID ABS
Z -1.0000 IN RAPID ABS
31 FEED 5.0 IN
32 X -1.0000 IN FEED ABS
Y 0.0000 IN FEED ABS
Z -1.0000 IN FEED ABS
33 X 0.2500 IN FEED ABS
Y 1.2500 IN FEED ABS
Z -1.0000 IN FEED ABS
34 X 0.0000 IN RAPID ABS
Y 0.0000 IN RAPID ABS
Z 0.0000 IN RAPID ABS
43 FEED 20.0 IN
44 DWELL 1.0
45 TOOL 1
46 V20 14.0000 IN
47 V21 0.1000 IN
48 V24 0.1000 IN
49 G81
50 X 0.7500 IN RAPID ABS
Y -.5000 IN RAPID ABS 
Z -.1400 IN RAPID ABS
51 DO 4
52 X 1.0000 IN RAPID INCR
53 END
54 Y -1.0000 IN RAPID INCR
55 DO 4
56 X -1.0000 IN RAPID INCR
57 END
58 Y -1.0000 IN RAPID INCR
59 DO 4
60 X 1.0000 IN RAPID INCR
61 END
62 Y -1.0000 IN RAPID INCR
63 DO 4
64 X 1.0000 IN RAPID INCR
65 END
66 G80
67 TOOL 0
68 Z 0.0000 IN RAPID ABS
4644 X 0.0255 IN FEED INCR
Y 0.0000 IN FEED INCR
Z 0.0000 IN FEED INCR
5145 X 0.0000 IN FEED INCR
Y 0.0000 IN FEED INCR
Z 0.0000 IN FEED INCR
5196 X 0.0255 IN FEED INCR
Y 0.0000 IN FEED INCR
Z 0.0006 IN FEED INCR
5224 X 0.0255 IN FEED INCR
Y 0.0000 IN FEED INCR
Z 0.0000 IN FEED INCR
980 X 0.0255 IN FEED INCR
Y 0.0000 IN FEED INCR
Z 0.0000 IN FEED INCR
1481 X 0.0000 IN FEED INCR
Y 0.0000 IN FEED INCR
Z 0.0000 IN FEED INCR
1532 X 0.0255 IN FEED INCR
Y V0 FEED INCR
Z 0.0006 IN FEED INCR
1560 X 0.0255 IN FEED INCR
Y 0.0000 IN FEED INCR
Z 0.0000 IN FEED INCR

----------------------------------------------------------

%
N0G0G70G90
N10X0Y0
N20F20
N30G29T1001X0
N40G29T1002X.1875
N50T0
N60G81
N70G29LV11 0
N80G29LV12 -1.5775
N90G29LV13 0
N100G29LV15 0
N110G29LV16 180
N120G29LV17 2
N130G29LV18 2.36
N140G79
N150X0Y0
N160G2X0Y0I0J-1.5775
N170G0X0Y0Z0
N180X-1.1Y-.1Z-1
N190F5
N200G1X-1Y0Z-1
N210X.25Y1.25Z-1
N220G0X0Y0Z0
N230F20
N240G29G4 1
N250T1
N260G29LV20 14
N270G29LV21 .1
N280G29LV24 .1
N290G81
N300X.75Y-.5Z-.14
N310G29D4
N320G91X1
N330G29E
N340Y-1
N350G29D4
N360X-1
N370G29E
N380Y-1
N390G29D4
N400X1
N410G29E
N420Y-1
N430G29D4
N440X1
N450G29E
N460G80
N470T0
N480G90Z0
N490G1G91X.0255Y0Z0
N500X0Y0Z0
N510X.0255Y0Z.0006
N520X.0255Y0Z0
N530X.0255Y0Z0
N540X0Y0Z0
N550G29X.0255YV0Z.0006
N560X.0255Y0Z0
%

[Hythos]


ANILAM ELECTRONICS CRUSADER RS-232-C 880915-777
1 TOOL 1001
2 X 0.5000 IN RAPID ABS
Z 1.0000 IN RAPID ABS
3 TOOL 0
4 Z 0.0000 IN RAPID ABS
5 X -2.0000 IN RAPID ABS
Y 1.0000 IN RAPID ABS
6 TOOL 1
7 X 1.6520 IN RAPID ABS
Y -.3750 IN RAPID ABS
8 Z 0.1000 IN RAPID ABS
9 CALL 1
10 X 2.3775 IN RAPID ABS
Y -.3750 IN RAPID ABS
11 AUX 100
12 CALL 1
13 X 2.3750 IN RAPID ABS
Y -3.6250 IN RAPID ABS
14 AUX 300
15 CALL 11
16 X 1.6250 IN RAPID ABS
Y -3.6250 IN RAPID ABS
17 AUX 200
18 CALL 1
19 TOOL 0
20 Z 0.0000 IN RAPID ABS
21 X -2.0000 IN RAPID ABS
Y 1.0000 IN RAPID ABS
22 END
23 SUBR 1
24 FEED 7.5 IN
25 Z -.3000 IN FEED ABS
26 X -1.2500 IN FEED INCR
Y -1.2500 IN FEED INCR
27 Z 0.1000 IN FEED ABS
28 AUX 800
29 END

---------------
%
N0G0G70G90
N10G29T1001X.5Z1
N20T0
N30Z0
N40X-2Y1
N50T1
N60X1.652Y-.375
N70Z.1
N80G29C1
N90X2.3775Y-.375
N100M100
N110G29C1
N120X2.375Y-3.625
N130M300
N140G29C11
N150X1.625Y-3.625
N160M200
N170G29C1
N180T0
N190Z0
N200X-2Y1
N210G29E
N220G29S1
N230F7.5
N240G1Z-.3
N250G91X-1.25Y-1.25
N260G90Z.1
N270M800
N280G29E
%

[Hythos]

Here are a couple entries I'm trying to resolve:
----
110. Tool list format.
"(MTOOL","T100",list_tool_number,"S1","D",tool_dia meter,"H",tool_length,"DIAM_OFFSET ",list_tool_number,"= ",tool_radius,")"
---

Correct input format to define a standard tool should be:
N T1001 X.25 Z1.5
SO, I would suspect the Post should include:
"T100",list_tool_number,"x",tool_radius,"z",tool_length

Furthermore, I would expect I won't need to define G44 as the tool-length is included in the tool-definition...

[Hythos]

Next, Subroutines have a redundant call...
IE:
-----
7. Sub program call
n,sub_call,sub_num,comment_start,"SUBPROGRAM CALL",comment_end
8. Sub definition
sub_num_with_prefix,sub_comment
9. Sub program return
rigid_tapping_end
n,sub_return,comment_start,"SUBPROGRAM RETURN",comment_end
-----

results in:
N005 G29 C C10 $ SUBPROGRAM CALL
N010 G29 S C10 $SUBPROGRAM OF S100

Correct formatting should be:
N005 G29 C1
(G29 is required for 'special' inputs)
So here's what I I've modified it to:
7. Sub program call
n,"G29","C",sub_num,<comments, blah blah blah, ect>
8. Sub definition
N,"G29","S",sub_num,sub_comment
** However - the program #'s are still 2-digit instead of 1. Previous tests failed at 2-digit subroutine numbers, but they might work now. I'd like to use a single-digit sub#

[Ventana]

Hythos,
Did you ever get a post processor working?

[peewees4]

did you ever get your post going
the posts on there web page are non functional for the crusader M
Defining a tool in the post
T1001 X.25 Z1.5
T10 tells the controller you are inputing
01 the tool number,
X the tool dia
Z the tool offset

at a glance the tool call must be T01F7.5

T for tool , 01 for the tool number and yes the 0 must be there
F for feed rate and should be called with the tool

Cheers