[yoshi900]

Has anyone used one of these cheaper digital protractor (inclinometer).

http://www.use-enco.com/CGI/INSRIT?P...&PARTPG=INLMK3


http://www.use-enco.com/CGI/INSRIT?P...&PARTPG=INLMK3


Of course I would prefer to buy a Mitutoyo inclinometer and they cost like $200-400.

The all seem to have similar "spec", but we all know those numbers might not be very well represented.

I am trying to see if it's justified to spend the extra $150-350 for a inclinometer that I might use only a few times a year.

[Fiddlemaker5224]

http://www.woodcraft.com/family.aspx?familyid=5894

Here is the best one that I have tried out. Even if its a woodworkers version it is great for the drill press and band saw tables. And it costs less

[BillTodd]

These are quite nice and reasonably accurate (to 0.05 degrees)


Get it right - Digital angle finder

There's also the possibility of reading the data out for a cheap DRO:Digital angle finder disassembled

[hkrok]

These tools are very good. You may trust them.

[hkrok]

another one


www.roktools.com