Hi everyone, i see that in this forum a lot of users had the tr-65 fadal rotary table...well, i have one as well, mounted on a Fadal VMC 4020 ,but i have no .opt file for postprocessing....i´m using delcam powermill, but cannot postprocess any 4 or 5 axis milling trajectories...does anyone have an opt file that i can test?? I attach my regular 3 axis opt fiel, works fine...Thanks in advance for your help.
Results 1 to 2 of 2
-
05-28-2009, 05:40 PM #1
Registered
- Join Date
- May 2009
- Posts
- 12
Need postprocessor for fadal-tr65 5 axis rotary table
-
10-12-2011, 11:05 PM #2
Registered
- Join Date
- Aug 2011
- Posts
- 0
need post processor 5 axis g code x,y,z,a,b head,head
Reply With QuoteSimilar Threads
-
Rotary table 4th axis set up
By usfwalden in forum Knee Vertical MillsReplies: 3Last Post: 08-16-2018, 10:25 PM -
what is fadal 5 axis tr65 worth?
By paulmars in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 06-02-2011, 12:53 AM -
Fadal 4th Axis Rotary /w Thru Hole ?
By northwestfab in forum FadalReplies: 19Last Post: 12-15-2007, 04:16 AM -
Fadal VH65 Oil/lubricant 4th Axis Rotary Table
By victortango in forum FadalReplies: 4Last Post: 07-20-2007, 02:19 PM -
Using a non-Fadal Rotary Table With a Fadal VMC
By Fudd in forum FadalReplies: 4Last Post: 03-02-2006, 04:46 AM
Tags for this Thread
Posting Permissions
