[Jesse_Daniels]

Need Help! I work at Pacific Manufacturing Ohio. I did a T1M6 Tool Change and the spindle aligned with the Magazine and then the machine pauses. After 3 minutes the CNC machine will error out. I have attached two pictures. Its talking about the ATC input information does not match the ATC sequence #. Error 3705

I can also be reached at 937 763 0891

Thanks

[terkaa]

It seems that spindle is not oriented. You can try to orient spindle in manual mode by pressing spindle orient and interlock release at same time. Or you can try pressing 1 step reverse from ATC panel until you get to sequence no 1 (You can see sequence number by pressing ATC button under machine display)

Need Help! I work at Pacific Manufacturing Ohio. I did a T1M6 Tool Change and the spindle aligned with the Magazine and then the machine pauses. After 3 minutes the CNC machine will error out. I have attached two pictures. Its talking about the ATC input information does not match the ATC sequence #. Error 3705

I can al

so be reached at 937 763 0891

Thanks