Hi , we have just got a mx puma and i have a strange thing happening when i set a tool , any help would be greatly received.
I probe tool 10 at B0 , the F value is 0 so no offset on the z .I then use the tool and it is fine cuts bang on size. T010010 G400 B-45 J1 R3 K3 W10. this seems to work well

t010000
M6T11 next tool in , now this is a l/h tool . t011011 G400 B-45 J2 R3 K3 W11 . this is over a MM out in the x and seems out in the z.....

Both tools have a F0 value

Thanks in advance for any help


Toby