[Mr.Chips]

Mirror/Picture frame.


.

Switcher,
Thanks for posting some neat and useful Zip files. Would this one require "V Carve"?

Thanks and keep the neat files comming.

[Switcher]

Here is a picture of the plasma cut flag from your DXF back in post #1201.

This is the only smiley I could find with a flag! :bs:
Must mean "bare steel."

Looks Great!

It's funny how that started out as a coloring book page.

I'll try & put some more files up here, this weekend.


.

[Switcher]

Switcher,
Thanks for posting some neat and useful Zip files. Would this one require "V Carve"?
Thanks and keep the neat files comming.

That would probably be one of the easier programs to use, I'm sure others would work.


.

[Mr.Chips]

That would probably be one of the easier programs to use, I'm sure others would work.


.

I should have asked, did you use V Carve if not which software?

Thanks

[Switcher]

I should have asked, did you use V Carve if not which software?

Thanks

Yes, I used Vcarve Trial.

I use 3 programs to generate the DXF files, in this order.

I use Vcarve for line thinning it works 100 times better than Wintopo thinning, that's the key to generate files from coloring books

(In this order)
1) Vcarve Trial
2) MsPaint
3) WinTopo Freeware





.

[Mr.Chips]

Yes, I used Vcarve Trial.

I use 3 programs to generate the DXF files, in this order.

I use Vcarve for line thinning it works 100 times better than Wintopo thinning, that's the key to generate files from coloring books

(In this order)
1) Vcarve Trial
2) MsPaint
3) WinTopo Freeware
.

Thank you Thank you Thank you, from all the newbies out here. :rainfro:

[dertsap]

you may want to look at this thread , this guy is offering tutorials for the use of gmax and a bunch of other free softwares , ive been playing with this for the last 2 weeks and its pretty incredible what a guy can do with this stuff , well worth the 20 bucks for the tutorials , it takes a bit to wrap your head around it but it's excellent
http://www.cnczone.com/forums/showthread.php?t=43622

[Mitsuboy]

Here are a couple of old cars.

[Mitsuboy]

Hello,

Here are a few older cars.

[mlind]

Switcher,

Thank you for the DXF files, especially the valentine ones. I know my GF will enjoy the one that I made for her from one of your DXF files. I'll try to post a DXF this week but mine are no where near as good as the ones you make/post.

I made the kid a tinkerbell engraving but it didn't turn out very good because I'm not good at making/converting files.

Again thank you for your posts, they are appreciated.

[Switcher]

Switcher,

Thank you for the DXF files, especially the valentine ones. I know my GF will enjoy the one that I made for her from one of your DXF files. I'll try to post a DXF this week but mine are no where near as good as the ones you make/post.

I made the kid a tinkerbell engraving but it didn't turn out very good because I'm not good at making/converting files.

Again thank you for your posts, they are appreciated.

Your welcome.

.

[Switcher]

Deer for the plasma.

.

[Khalid]

switcher can you send grapevine..
best regards

[Switcher]

Deer #2 (plasma).

.

[Switcher]

switcher can you send grapevine..
best regards

Router or Plasma?

.

[Switcher]

Grapevine (router), didn't turn out that great, maybe I'll try another one later.

.

[Khalid]

its beautiful switcher thanks , if u have more then please post here. i will make a 3D relief of them with ARTCAM PRO and will post here.
Best Regards

[Switcher]

Wolf (Plasma).

.

[Switcher]

its beautiful switcher thanks , if u have more then please post here. i will make a 3D relief of them with ARTCAM PRO and will post here.
Best Regards

Cool.

I bet ARTCAM will look really good.

Thanks.

.

[Switcher]

Rooster (plasma).

I included 2 holes at the top to hang from sign post, just delete them in your cad program If not needed.

.