Re: Oil Lubricant Pump for Laguna 4x8 Smartshop 2 SUV
Originally Posted by
mh6
I recently purchased a used 2021 Laguna Smartshop 2 SUV with a Syntec controller. I feel like maybe the lubricant pump is not working, the gauge is always at 0, and I can't really feel any vibration at the pump. There is oil in the reservoir and in the lines, but there are also some air bubbles further up the lines.
I assume the gauge should have some reading, does anyone know what a nominal reading would be? The random manuals and documentation I can find are severely lacking. Does it only turn on intermittently, and if so does the gauge only have a reading while it is on?
I just need some way to verify it works or doesn't work prior to replacing it. At this point I'm leaning towards that it isn't working.
Normally the CNC will lubricates automatically, the time intervals can be set by CNC controller parameters.
You can also mark the oil level on the oil tank, and see if it gets lower after running few days.
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html