603,939 active members*
1,922 visitors online*
Register for free
Login

Thread: gcode

Results 1 to 4 of 4
  1. 02-23-2010, 01:17 AM #1
    55chevyguy
    55chevyguy is offline Registered
    Join Date
    Feb 2010
    Posts
    0

    gcode

    lazy cam wrote this gcode but mach3 finds error won't run them
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  2. 02-25-2010, 03:38 PM #2
    tjones14
    tjones14 is offline Registered
    Join Date
    Feb 2010
    Posts
    0
    It would help to know what error that Mach3 is giving. It may not be a problem with the code itself but rather an issue with offsets or absolute values that are currently stored in Mach3.
    Reply With Quote Reply With Quote
  3. 02-25-2010, 05:57 PM #3
    55chevyguy
    55chevyguy is offline Registered
    Join Date
    Feb 2010
    Posts
    0
    The error is RADIUS TO END OF ARC DIFFERS FROM RADIUS TO START , in the case of Bench side,LINE 33. This error is same for serial of gcode from lazy cam only of coarse line #
    Reply With Quote Reply With Quote
  4. 02-25-2010, 06:26 PM #4
    tjones14
    tjones14 is offline Registered
    Join Date
    Feb 2010
    Posts
    0
    I just found this post in the Mach3 forums. Hopefully this is will fix your issue.

    http://www.machsupport.com/forum/index.php?topic=1075.0
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. svg to gcode?
    By b0j3 in forum OpenSource Software
    Replies: 9
    Last Post: 08-22-2007, 05:08 AM
  2. Gcode I think
    By Mr.Chips in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 10-27-2006, 12:52 AM
  3. I have a problem with my gcode or my conversion to gcode , everything is tiny?
    By NickLatech in forum G-Code Programing
    Replies: 0
    Last Post: 03-10-2005, 07:46 PM
  4. GCode
    By rogerbureau in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 1
    Last Post: 02-07-2005, 02:36 PM
  5. gcode to gcode converter
    By july_favre in forum Uncategorised CAM Discussion
    Replies: 4
    Last Post: 05-25-2004, 12:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules