Re: PathPilot on NM200
Originally Posted by
kvom
Here's the pins from the Mach3 configuration
outputs:
X-axis: step 2, dir 3
Y-axis: step 4, dir 5
Z-axis: step 6, dir 7
A-axis: step 8, dir 9
Spindle: 14
Dirs on X and A are low for proper direction
Inputs:
E-stop 10
X home 11
Y home 12
Z home 13
Home switches are active low
So your spindle direction is probably on 14, how do you control the speed of your spindle? I'm not familiar with the NM200.
Scott...
Instructional Videos for CNC Guitar Building
http://www.rmgvideos.com