![Quote](images/misc/quote_icon.png)
Originally Posted by
RMHCNC
It is a ER11 colet with 8mm shaft, I removed the shaft from the outrunner and installed the ER11. It takes some minor mods like grooving the colet for the retainer clips but seems to work well
![Smile](images/smilies/smile.png)
could you elaborate on the conversion procedures for fitting the ER-11 shaft into the outrunner motor? I'm not yet familiar with the outrunners but you have made good use of it as a spindle.
Thanks!
Shoptask rebuild:
http://www.cnczone.com/forums/showthread.php?t=2139
Home built gantry router:
http://www.cnczone.com/forums/showthread.php?t=5049