Hello.

I have just started to build a steel frame cnc wood router and I thought I'd share some photos of the build as it goes forward and also give you some information about the router along the way.

The mainframe is built using I-beams and square-tubing. The I-beams are approximately 273mm high and 137mm wide and each one weighs about 80kgs. The square-tubing is 80mm x 80mm x 4mm.

I'm going to bolt everything together, and that makes it possible to adjust the machine at a later point if necessary.

As soon as I figure out how to post photos I will start posting photos of the router.