603,946 active members*
2,525 visitors online*
Register for free
Login

Thread: building 2 5x10 plasma tables

Results 1 to 20 of 174

Threaded View

dnelso building 2 5x10 plasma tables 08-18-2011, 03:38 AM
I Lean I like the buggies in the... 08-18-2011, 03:41 AM
Boogiemanz1 Looking good..............jb 08-18-2011, 05:28 AM
arewehavingfun Nice build! Are you using... 08-18-2011, 01:30 PM
dnelso Yes the gantry will be steel.... 08-18-2011, 05:44 PM
AndiKid I just LOVE LOVE LOOOOOOOVE... 08-20-2011, 08:28 PM
dnelso Thanks Andikidd, Did you... 08-21-2011, 02:11 AM
dnelso more progress 08-28-2011, 03:39 AM
Boogiemanz1 Dave that is a very clean and... 08-28-2011, 08:02 PM
Dustin407 Nice!!!! 08-29-2011, 05:43 PM
dnelso thanks dustin and Boogiemanz.... 09-08-2011, 03:36 AM
dnelso bearing blocks that hold the... 09-11-2011, 03:13 AM
Boogiemanz1 Dave, I have been getting to... 09-11-2011, 03:57 AM
dnelso Here are a few more pics.Got... 09-19-2011, 03:30 AM
blarb Hi guys first time poster... 09-21-2011, 11:45 AM
dnelso Here are the rails that we... 09-21-2011, 02:02 PM
blarb Any more progres Dave ? ... 09-26-2011, 01:32 PM
dnelso Blarb No major progress. Got... 09-27-2011, 01:55 AM
blarb I dont think ill be getting... 09-27-2011, 11:22 AM
dnelso I had a feeling they would be... 09-27-2011, 01:45 PM
blarb How are the tables going Dave... 10-05-2011, 01:01 PM
dnelso movement 10-23-2011, 02:27 AM
dnelso Some pics and vid of old... 10-24-2011, 07:45 PM
4R8 yeah, can't nrst a part like... 10-24-2011, 08:07 PM
dnelso progress 11-07-2011, 03:42 AM
dnelso More pics 11-11-2011, 03:28 AM
rjasonadams Dave, I noticed the water... 08-19-2012, 04:43 PM
dnelso The water tray is sloped to... 08-19-2012, 09:05 PM
jeep534 Z axis question 01-28-2013, 04:12 PM
dnelso The z axis is made by k2cnc 01-29-2013, 02:42 AM
jeep534 Z axis question 01-29-2013, 03:07 AM
dnelso they are 12 in travel 01-31-2013, 02:22 AM
jeep534 Z axis 01-31-2013, 01:45 PM
jon byler Hi Dave, Looking at how... 02-07-2013, 10:24 PM
diyengineer Why would you pay more money... 02-08-2013, 10:07 AM
jon byler that was the question: is... 02-08-2013, 08:42 PM
jeep534 gantry.... 02-08-2013, 09:40 PM
dnelso Gentlemen, There were a few... 02-12-2013, 05:00 AM
jon byler with direct drive, do you... 02-14-2013, 08:15 PM
dnelso with the lighter gantry you... 02-15-2013, 01:31 AM
ajclay Dave, Just about fell out the... 03-20-2013, 12:17 AM
dnelso The powdercoat still looks... 03-21-2013, 03:39 AM
Kerryfisher Give us a clue Aj cos I can't... 03-22-2013, 01:23 PM
ajclay If you look at the two linear... 03-23-2013, 03:41 AM
ajclay Dave, I keep coming back... 03-18-2013, 01:04 PM
eloid Can you explain or show use... 08-02-2015, 01:35 PM
dnelso Re: building 2 5x10 plasma... 08-09-2015, 03:22 AM
Johnpo Re: building 2 5x10 plasma... 08-11-2015, 07:06 PM
Dragnbody Very nice looking table! Ive... 11-16-2011, 08:58 PM
dnelso Dragnbody Thanks I haven't... 11-17-2011, 12:20 AM
dnelso got wire tracks done 11-20-2011, 05:19 AM
AndiKid Dnelso 5 Star Tables 11-22-2011, 06:48 PM
mattamd_xp It appears that you tapped... 12-02-2011, 03:41 AM
dnelso The tubing is 3x3 3/16 wall 12-02-2011, 05:12 AM
dnelso Finished wiring 12-04-2011, 04:29 AM
Boogiemanz1 Hi Dave, your tables are... 12-04-2011, 06:00 AM
diyengineer This is a gorgeous machine!! 12-04-2011, 07:45 AM
dnelso Thanks for the kind words. ... 12-04-2011, 06:33 PM
dnelso got table 1 wired and limit... 12-10-2011, 03:09 AM
lik2waterski Both of these tables are... 12-10-2011, 03:27 AM
diyengineer As far as getting water on... 12-11-2011, 01:52 AM
eric8x I have a Miller syncrowave... 12-12-2011, 01:48 PM
Dustin407 Awesome Job... 12-15-2011, 08:11 PM
dnelso the cost for 1 table was... 12-16-2011, 05:02 AM
dnelso Started work on the air... 12-26-2011, 01:20 AM
banjopup Yeah it keeps getting better. 01-30-2012, 04:40 AM
Boogiemanz1 A severe case of... 01-30-2012, 06:06 AM
banjopup Dave, What would be the... 01-30-2012, 10:53 PM
dnelso banjopup the rack and pinion... 01-31-2012, 03:04 AM
banjopup Dave, You do realize that... 01-31-2012, 12:54 PM
dnelso Sorry for not getting any... 02-21-2012, 03:55 AM
Boogiemanz1 Dave if changing to the mini... 02-21-2012, 06:14 AM
diyengineer If you went with the mini... 02-21-2012, 10:12 AM
Boogiemanz1 When I ordered a mini torch... 02-22-2012, 05:24 AM
Alleykat How thick were these pieces?... 03-27-2012, 12:23 AM
Islam Fanastic and well designed... 03-02-2012, 09:06 AM
dnelso found the rack and pinion.... 03-06-2012, 03:24 AM
Boogiemanz1 Hi Dave, do you have a... 03-06-2012, 06:01 AM
dnelso Not the greatest pic. Dave 03-06-2012, 03:25 PM
Alleykat Went back and read the whole... 03-27-2012, 12:43 AM
sparkness Attaching linear rail... 03-27-2012, 02:51 PM
leop You use the mill to drill the... 04-26-2012, 09:36 PM
Boogiemanz1 leop, I believe that Dnelso... 04-27-2012, 05:41 AM
ncsugrad2006 Beautiful tables, some of the... 04-29-2012, 03:36 PM
thefu I have that same style motor... 08-14-2012, 04:14 AM
ajclay How about a few photos so we... 08-14-2012, 11:40 AM
thefu its quite literally that same... 08-14-2012, 11:43 AM
thefu http://pictures.targetsfromus.... 08-14-2012, 02:31 PM
dnelso That looks cool. I am going... 08-14-2012, 11:49 PM
thefu i use some pretty expensive... 08-14-2012, 11:54 PM
dnelso Most of my crashes come from... 08-15-2012, 02:28 AM
thefu ive been pretty slammed in... 08-15-2012, 02:33 AM
thefu http://pictures.targetsfromus.... 08-15-2012, 06:45 AM
thefu http://pictures.targetsfromus.... 08-16-2012, 04:18 PM
ajclay The work looks good that's... 08-17-2012, 12:09 PM
DAVID_BASK Great Work 08-16-2012, 04:39 PM
dnelso David Thanks I use hiwin ... 08-17-2012, 02:18 AM
DAVID_BASK dnelso, Thanks, Hiwin is... 08-20-2012, 07:12 PM
dnelso Thanks David. I will keep... 08-21-2012, 03:33 AM
thefu holes are drilled and reamed... 08-17-2012, 06:20 PM
brouser1 Great build, very high... 03-17-2013, 03:42 PM
Guest Thank... 03-21-2013, 01:06 PM
Kerryfisher Ah right I see now so the... 03-23-2013, 10:32 AM
ajclay Kerry, The torch has to be... 03-23-2013, 01:10 PM
ajclay By the way... Photos isn't... 03-23-2013, 01:12 PM
Kerryfisher Thanks Aj, looks like I have... 03-23-2013, 01:35 PM
ajclay Yep that was the best photo... 03-23-2013, 01:48 PM
LeeWay That is a very nice compact... 03-23-2013, 02:27 PM
dnelso Re: building 2 5x10 plasma... 08-12-2015, 03:17 AM
dnelso Re: building 2 5x10 plasma... 10-15-2015, 02:12 AM
  1. 10-24-2011, 07:45 PM #11
    dnelso is offline Registered
    Join Date
    May 2006
    Posts
    238
    Some pics and vid of old machine cutting 3/16 steel.
    Lots of waste
    [ame=http://www.youtube.com/watch?v=qLOSIip8ycg]3/16 steel plasma cut - YouTube[/ame]
    Attached Thumbnails Attached Thumbnails IMAG0304.jpg   IMAG0306.jpg   IMAG0307.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Building another 5x10
    By dnelso in forum Plasma, EDM / Other similar machine Project Log
    Replies: 80
    Last Post: 11-10-2015, 12:40 AM
  2. Building a 5x10 table with HBD gantry
    By mecatrodatos in forum Waterjet General Topics
    Replies: 4
    Last Post: 11-07-2012, 02:38 AM
  3. PRL motorsports 5x10 plasma table
    By Prl motorsports in forum Plasma, EDM / Other similar machine Project Log
    Replies: 5
    Last Post: 02-13-2012, 09:09 PM
  4. Anyone in the UK building DIY plasma tables?
    By adscnc in forum Waterjet General Topics
    Replies: 12
    Last Post: 01-02-2012, 03:23 PM
  5. Precision Plasma LLC 2x2 Portable Plasma Tables for $1950
    By rchacich in forum News Announcements
    Replies: 0
    Last Post: 11-06-2010, 04:47 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules