thats what I am looking for. can you email the file? [email protected]
thats what I am looking for. can you email the file? [email protected]
Superman 3D logo by cplicious - 3d model - .obj
Hope these help.
You just save 56 EUROS :cheers:
3D Superman Logo by cplicious on Shapeways
Logo superman - Other, Autodesk Inventor, AutoCAD, STEP / IGES, STL - 3D CAD model - GrabCAD
Check this out and see if it's what you need.
Larry
Attachment 187826
we are looking to engrave our unit logo in the hangar
Does anyone have the ability to convert the attached to .DXF ? We dont have the software expertise to pull it off
Attachment 187830
looking for a 46mm crowsfoot wrench
Guy's anyone got a dxf file of an angel or cherub please?
I found a few searching this thread.
http://www.cnczone.com/forums/genera...tml#post637833
http://www.cnczone.com/forums/genera...tml#post815542
http://www.cnczone.com/forums/genera...ml#post1205907
http://www.cnczone.com/forums/genera...tml#post521789
And there are more on here.
Thanks your a star!
Can someone please convert the following image's to dxf for me. This is for a cnc plasma.
Thanks
IsaacAttachment 188080
Try this site: Ingyenes Reliefek, Free relief <!--if()-->- <!--endif--> - Fájlkatalógus - Hobby , 3D, Relief, CNC, fafaragás I'm pretty sure that there is a cherub on his site, he has some very good files there.
Eric
anyone have a plasma dxf for a 67 chevelle?
Ok here's a pic of the two rose blanks, the cleaned up version is on the right.
Attachment 188490
I did a quick test run on some 24ga. I'll make my first attempt to form one up out of 18ga. cold rolled.
Thank you guys so much!
I just wanted to say thank you. i never have the time to do this kinda stuff. Freakin AWESOME!
My clean DXF design (arcs only) for Che-Guevara consists of three layers glued together as follows:
Lower layer - 1 pce - hair (black)
Mid layer - 2 pcs - face (White) + cap (green)
Upper layer - 1 pce - star (red)
made of 0.8 mm sheet metal
Have a nice time
Something for you all.