picture attached...

Ok, so in a frenzy I bought an inverter for my spindle thinking that i'd stick a plug on it. Failing to take into account all sorts of things that i should have done. :/

Anyway. The inverter manufacturer recommends a 24Amp fuse (which is more than a standard 13amp home plug). So i'm going to build the inverter, RFI filter and fuse/fuseholder into a cabinet.

My question is this: Can I safely run a cable from the fuse box, out of the cabinet and straight into a home wall socket, (uk, socket ring, 30Amp).

Also, If i put a plug on the end hardwired without a fuse, is this ok? technically speaking of course, since there is a fuse in the inverter cabinet.


Enter the fire brigade/ laughter from electricians.