[MERCEDES]

Dear members

I have a Mori Seiki SL1-A lathe with a Fanuc 3T-F and hydraulic turret 12 positions
Inside the Fanuc cabinet is normaly a list stored with information about options and
setting of diagnostic parameters and timer settings !

Is there somebody in the possion of such simular lathe (with lower turret pos is also oke)
and will send me the information on this list!
Send please info to [email protected]
Many thanks in advance!

[underthetire]

Not on a SL1A with a 3 T. Probably less than 50 parameters total if that. All timers etc were stored on Eprom.

[zoik4you]

i can give them to for 20$

[MERCEDES]

i can give them to for 20$

To Zoik4you

Dear Zoik4you

If You can realy send me a DATA SHEET with options parameters and DIAGNOSTOC Parameters settings
(TIMER Settings) of FANUC SYSTEM 3 T-F connected to a Mori Seiki SL1-A .I should be very happy!
Send the list to e-mail adres : [email protected]

and send me the information about your bankaccount or e-mail address to pay you by PAY PAL!

Sincerly Yours

MERCEDES

[MERCEDES]

i can give them to for 20$

Oké !! contact e-mal address [email protected]