hi all,
Newbie here and a simple overtravel on the z axis alarm has stumped me.
The CnC was sitting at home position, and i tried to auto home it, the 530 alarm went off. IDK how to reset the alarm or move the table/x-axis.
I"ve found that on the later model fanuc's, alarms can be reset by can+p, this doesn't seem to apply to the OM controller. any help is welcome.
To overcome my super uber noobishness, i'd like to find a Fanuc O-M manual. And read it cover to cover.
After spending hours searching for a Fanuc OM manual I'm finding nothing but frustration.
My machine is a "First MCV-641"
There is no other description. just FANUC OM.
Someone please help, i will be sure to pass it on.
your truly, Sinevise
(tool and die maker and once an EDM operator/programmer)