Hi,
thank you i see the data funny the Link i use is Nanotec: ST6018 Schrittmotor - NEMA 24 We never run the motors faster than 562.2 RPM because of the power delivered. We also need some force to decelerate our mill. I am sure (or not sure depends ) that the motor your mentioned has much lower braking resistance as we need for our application. But in the hopefully quiet time i will have a look on the data you mentioned ,.. i am not sure they can deliver the flu torque around the full speed range but it may be worth a check ,.. and you have col project on rout hp thumbs up