603,969 active members*
3,119 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > ArtCam Pro > Issues with working on curved surface.
Results 1 to 5 of 5

Hybrid View

Abdessamad8395 Issues with working on curved... 02-24-2023, 05:03 PM
RaderSidetrack Re: Issues with working on... 02-24-2023, 05:16 PM
SMD8593 Re: Issues with working on... 03-05-2023, 11:00 AM
Vlod Re: Issues with working on... 03-05-2023, 07:21 PM
bravernoe Re: Issues with working on... 05-31-2024, 01:29 PM
  1. #1
    Join Date
    Apr 2018
    Posts
    158

    Re: Issues with working on curved surface.

    As a convenience for readers of this thread, I have extracted the images contained within the .Zip file above and posted them as images below:

    Attachment 489740
    Attachment 489742
    Attachment 489744
    Click image for larger version. 

Name:	4)Relief.jpg 
Views:	0 
Size:	23.4 KB 
ID:	489746
    Click image for larger version. 

Name:	5)2D Toolpath.jpg 
Views:	1 
Size:	78.4 KB 
ID:	489748
    Attachment 489750
    Click image for larger version. 

Name:	7)3D Toolpath.jpg 
Views:	1 
Size:	73.6 KB 
ID:	489752
    Click image for larger version. 

Name:	8)3D Toolpath Simulation.jpg 
Views:	1 
Size:	75.4 KB 
ID:	489754

  2. #2
    Join Date
    Jun 2022
    Posts
    1

    Re: Issues with working on curved surface.

    Quote Originally Posted by RaderSidetrack View Post
    As a convenience for readers of this thread, I have extracted the images contained within the .Zip file above and posted them as images below:
    Thank you, I tried uploading them directly but they were over 500kb in size, and was worried that decreasing the size would make them illegible.

  3. #3
    Join Date
    Apr 2022
    Posts
    148

    Re: Issues with working on curved surface.

    Have you try to use down cut bits to preserve the edges.
    I prefer using Vectric Software for wood cutting, there is an option to project tool path on any surface and it’s very simple to use…
    They have tryouts versions.

Similar Threads

  1. Profiling on a curved surface
    By sdantonio in forum Rhinocam
    Replies: 1
    Last Post: 05-30-2014, 03:44 PM
  2. Curved Surface
    By crolee in forum Mastercam
    Replies: 4
    Last Post: 12-09-2012, 11:46 PM
  3. Cutter for curved surface?
    By flash319 in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 09-03-2010, 03:36 AM
  4. Curved Surface Toolpath
    By ehsanmax in forum Mastercam
    Replies: 8
    Last Post: 03-14-2008, 12:39 AM
  5. Engraving a curved surface?
    By wyobmf in forum Rhino 3D
    Replies: 8
    Last Post: 05-29-2007, 03:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •