Hello!
I know this forum is very nice and full of helpful people. But we require quite alot of assistance with setting up our new Servo system. We hit a dead end with our setup and cant figure out a way forward. Were a small hobby shop trying to make it in this competetive world and we are currently suffering alot due to the current setup what we have and our inability to get this Expensive servo system running.
If there is somebody here, who can help us up and running. And also help with adjusting/calibrating the system to its potential.
Im not sure how people will react to this offer, but to show my apprecciation I am offering a 100 €/$ Prize for the guy who gets us running. Or maybe Split it with the persons helping. But I am a man of my word. This is a real offer. I would like to offer much more, since this is so important to us. But sadly we dont have the finance yet for this. If somebody can help us. Man that would save my life
So, Intro aside, Our problem.
We built our own CNC frame with chinese cheap Stepper system. We got it working with UCCNC controller. But we never got it to work Properly. It was binding, slow, etc. So in hopes to fix it, we replaced the frame with a pro Chinese one. Same problem. So Now we went all out selling our kidneys and bought a Yaskawa Servo system.
We cannot get this servo system to operate with uccnc controller. We got the servopack connected with a Laptop(Through some ridicolous hazzle, creating an account on a japanese website through translate and downloading drivers for the newer servopacks what we have), and we are able to JOG a single servo with a laptop. But it will not listen to commands from Uccnc. And we are aware that even if it was listening to commands, there is a whole new world of "adjusting" the servos which we still know nothing about.
I added a bunch of pictures attached, with what we have and what we bought.
Yaskawa
Servopack: SGDXS-5R5A00A8002 / 200V
Servo: SGMXJ-08AUA6SC2 / 200V Ph3 / 4.4A 250HZ/ / 750 W
UCCNC Controller: UC300ETH-5LPT https://www.shop.cncdrive.com/index.php?productID=817
Breakout board: UCBB breakout board https://www.shop.cncdrive.com/index.php?productID=915
I really hope that I will find womebody here with some experience regarding our problem.
Thankyou so much!
Mihkel from Estonia.