603,354 active members*
3,025 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Gecko Drives > recurring problem - no holding torque

Thread: recurring problem - no holding torque

Results 1 to 20 of 51

Hybrid View

  1. 06-04-2008, 07:34 PM #1
    sunward
    sunward is offline Registered
    Join Date
    May 2005
    Posts
    22
    Quote Originally Posted by Crevice Reamer View Post
    The 1160 oz motor wired bipolar parallel could run at 80 V. ..
    The specs for the motors were given to the power supply company and they made the recommendation.

    IIRC, no mention of inductance was made at the time.

    The motors are not fried.
    Angelo Castellano
    Sunward Aerospace Group Limited www.sunward1.com
    Reply With Quote Reply With Quote
  2. 06-04-2008, 07:53 PM #2
    Crevice Reamer
    Crevice Reamer is offline Registered
    Join Date
    Mar 2008
    Posts
    3655
    Quote Originally Posted by sunward View Post
    The specs for the motors were given to the power supply company and they made the recommendation.

    IIRC, no mention of inductance was made at the time.

    The motors are not fried.
    Ahhh! So it was the PS company, not Keling. Well they got it HALF right.

    WOW! If those 400 oz. motors have been running at 180% of their normal voltage, AND they are NOT fried--Those Keling motors must be some FANTASTICALLY GOOD MOTORS!

    Glad to hear all will work out, and By the way:

    Welcome to the Zone sunward!

    CR.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. How to determine the Holding Torque Requirement?
    By joprinz in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 11-19-2007, 11:59 AM
  2. No holding torque or movement with G201
    By patdttr225 in forum Gecko Drives
    Replies: 6
    Last Post: 09-03-2007, 05:16 AM
  3. Holding torque?
    By Marc in forum Servo Motors / Drives
    Replies: 23
    Last Post: 08-22-2006, 09:19 PM
  4. Holding torque Ncm vs Oz/in
    By Georgie in forum Stepper Motors / Drives
    Replies: 3
    Last Post: 12-14-2005, 09:58 AM
  5. Holding Torque (please help)
    By dowling177 in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 01-18-2005, 08:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules