[Huahahahahaha]

adjust the lense
it's must fix your problem

adjust from lense after the tube first then go to next lens.
the laser must hit the middle of lens.
you must have VCD, how to allign the lens.
it's just turn the crew beside the lens.

[zax15uk]

adjust the lense
it's must fix your problem

adjust from lense after the tube first then go to next lens.
the laser must hit the middle of lens.
you must have VCD, how to allign the lens.
it's just turn the crew beside the lens.

I think you mean to adjust the mirrors so the laser is centered on the lens.

It is usually best to align with the longest beam path and then check at the shortest path distance.

Zax.

[vivinar]

dibby,if you bought is a chinese machine,i think they will give you a adjusting crossing.you can insert this on the lens and then input a paper in the crossing,then press the laser to test.first from the nearest place to the distance place,and make sure the burning crossing is at the same center place of paper.Test the lens one by one.
and beside the lens,it will have three screws which is used to adjust the heigth,left and right sides.
Hope this can help you.
[email protected]