[ihavenofish]

its for sale, want it? only a little concrete rash.



its actually a refinished recut 2008 model. and it was very gently laid onto the floor which is alot cleaner than it looks, no harm done.

[Larken]

its actually a refinished recut 2008 model. and it was very gently laid onto the floor which is alot cleaner than it looks, no harm done.

What model and how much ?
Why would a 2008 need refinish ( and frets recut ?)

Larry k

[ihavenofish]

What model and how much ?
Why would a 2008 need refinish ( and frets recut ?)

Larry k

hehehe....



thats what it was originally. i stripped the really badly done white paint and cut it into a 62 double cut shape, then refinished with a dye burst and tung oil. other than that its all stock.

[gio666]

My god, are you laying that Gibson Melodymaker on the concrete ? What year is that ?

Larry

WOW,good thing only used it a couple times to keep profiles up so they would not get scratched on floor LOL

[gio666]

Stand mounting kits

[ihavenofish]

WOW,good thing only used it a couple times to keep profiles up so they would not get scratched on floor LOL

hahaha

[Larken]

Wanna trade it for 3 viper servo drives ?

hehehe....


thats what it was originally. i stripped the really badly done white paint and cut it into a 62 double cut shape, then refinished with a dye burst and tung oil. other than that its all stock.

[ihavenofish]

Wanna trade it for 3 viper servo drives ?

ha, no. sorry. 3 granite devices drives maybe

[Larken]

ha, no. sorry. 3 granite devices drives maybe

In your dreams (HaHaHa)
3 of Tero's drives are a bit too much for your Frankensien modded oiled up creation. I was thinking more like 3 of my new baby Vipers @ $89 each

The granite is a great drive and the only way they would end up on your machine, (poor mister I haveNoFish ) is if there was a "Free Servodrives for Charity" thread, then you'd be the first in line. (Stick with your G540)

BTW, the main compaint people have with my Viper drives is I can't build them fast enough.

Also your axe would look out of place next to my Jackson :banana:

[ihavenofish]

In your dreams (HaHaHa)
3 of Tero's drives are a bit too much for your Frankensien modded oiled up creation. I was thinking more like 3 of my new baby Vipers @ $89 each

The granite is a great drive and the only way they would end up on your machine, (poor mister I haveNoFish ) is if there was a "Free Servodrives for Charity" thread, then you'd be the first in line. (Stick with your G540)

BTW, the main compaint people have with my Viper drives is I can't build them fast enough.

Also your axe would look out of place next to my Jackson :banana:

3x89 is less than half what i can get cash for the guitar. the offer borders on insulting.

i need the granite drives though cause my servos are brushless ac. (ill likely use georges new ones when they are ready).

[gio666]

Now have 4 Cable chains to chose from
ID is
25/25 , 15/18 ,25/38 and 10/15
all have pop up door and ends for every meter

[gio666]

XZero spindle
24v .ER16 collet, 3000 to 18000rpm
quick change pulleys
can run 24/7 with out any problem ,

[gio666]

I will be the Canadian distributor of the Teknomotor spindles and will have upto 10HP spindles and will be working on low price high quality tool changers for them

[gio666]

With the Artcam express, i will have monthly specials on modules,which will make it even better,as you could get only what you want and need at a great price

[gio666]

In 3 weeks i hope to have picture of DemonX with 15 of the XZero spindles and a Quick change table top,first of 4 of them for large company

[gio666]

Couple changes on the ViperXZ and ViperX2, now have 4080 or 8080 ,have double bearing on all axis ,all now have 1610 and 2510 ,bearing house is changed a bit to get 1/2 inch more travel on Y axis and fit double bearing too .
Can change for people that have VipoerXZ already the bearing house

[gio666]

Pricing that is post on my forum will only be good till my web site up with ordering online , hopefully in a week or so,

[gio666]

I also have 2 people that are going to start working with me ,so it will change things a lot and i will have lot more time to make more and advanced products that i want to but never have time for the machines

[JD68]

All these "teasers" look interesting. How does one buy them?

JD

[ihavenofish]

All these "teasers" look interesting. How does one buy them?

JD

just pm him i guess. he'll set you up with all the relevant info.